How To Reset FiOS Remote - A Simple 3-Step Guide [year] (2024)

For subscribers inquiring about how to reset FiOS remote, we find this article interesting. The latest remote control from Verizon especially for FiOS TVs is smaller in size but they comprise of interesting features. Despite the functionality being superb you might sometimes notice that’s the remote suddenly stops working.

From all indications, so many subscribers are currently facing this issue now. This can be caused by some factors such as interference with the infrared all low battery.

This writer will help you find the appropriate solution on how to resolve and reset your FiOS remote.

Factors that can stop your Fios Remote from working

Your FiOS remote can suddenly stop working for several reasons. Because the remote control needs to be programmed to set up the box, technical issues come arise thereby preventing the remote from operating fully.

The most common among these factors are as follows.

Batteries that are entirely drained

Even when the remote control is new, there are chances that the batteries must have been drained. Sometimes the remote control might end up hogging the newly inserted batteries faster as a result of some reasons.

Issue with Programming

As already stated, all remote controls must be programmed to a particular set-top box before it can function optimally. But in a situation where the remote controls are not functioning and the batteries are still new, then this issue might be linked to the programming. At this point, you must reprogram the remote control.

Obstacles affecting the signal

This is also another common problem that might affect the remote from functioning optimally. This often happens when you are not in the line of sight to the top of the box.

Remember the FiOS TV remote comprises of IR, hence there must be no obstacle blocking it.

How to reset FiOS remote

1. Press and continuously hold 2 buttons and OK together. Release after a few seconds.
2. Press 9-0-0 in that sequence.
3. You will notice the Red LED blinking thrice. Then turn off, to confirm if the settings have been restored.

If you notice there is no improvement, then you need to reprogram the remote depending on the set-up box. Usually, the FiOS remote is made up of three different remote controls and the programming might be slightly different.

From the manual, you can consult the appropriate method of doing this.

When can I Reset a FiOS Remote?

It is important to note that resetting a remote control wipes out every setting, hence this should always be a last resort. Before you reset you must ensure that you must have exhausted all other possible options like changing the battery, putting off the TV box, etc. Resetting the remote also comes in handy when you find it difficult to unpair a remote from the TV box.

Gettings the FiOS Remote Codes

The P263 and P265 remote with the set-top box already come programmed, however, you still need the specific code for your TV before it can connect. To successfully pair a remote to a TV, switch ON the TV, then press the remote.

1. Navigate to the Menu
2. Customer Support
3. Support Tools
4. Program. From here, you can follow the on-screen instructions which will help you automatically find code depending on your TV model.

In Conclusion

When resetting finally fixes whatever the issue is with your remote, then you have successfully rectified it. The good thing is that you come now reset it yourself in case it happens again.

Frequently asked questions

What could be wrong with why my FIOS remote is not working?

If you are currently faced with this challenge, try and reboot the box and as well change the batteries of your remote control. If this does not solve this problem, confirm if there are obstacles looking at the signal. Otherwise, you may have to reprogram the remote.

How can I successfully connect my FIOS remote to the box?

Direct the FiOS remote to the TV, press and hold the ‘0’ and play/pause button until a blue light flashes. With this, it has paid automatically.

My TV suddenly stopped responding to the remote?

The first culprit whenever this happens is low batteries. Also, ensure that you’re correctly pointing the remote to that TV. Sometimes they may be interference coming from electronic, lightning, or other appliances blocking the remote sensor

Will Verizon change my remote?

Yes, they will when your remote is malfunctioning or lost but you may be required to make an additional payment. You can approach any Verizon accessory store for more clarification.

Can a universal remote perfectly work with Verizon FIOS?

Most function perfectly with Verizon Fios.